- Features
- Return and Delivery
- Payment Options
- Comments (0)
-
General Information;
PUNTA Archery Glue, A superb adhesive for feathers, nocks, or bonding vanes to wood aluminum, carbon, etc. for arrow shafts.
Cyanoacrylate adhesives achieve high bond strength at room temperature without applying pressure.
Curing speed can be increased by low alkaline substances, including traces of moisture on the surface of the parts to be bonded.
Due to the solvent-free nature of the adhesives, shrinkage of the cured material is negligible. In addition, these adhesives have very good solvent resistance.
Product Information;
PUNTA feather adhesive is a high-viscosity cyanoacrylate adhesive. It is specially formulated for feather and rear sticking applications.
Main Article: Ethyl Cyanoacrylate
Appearance (pre-cure): Liquid
Collar: Colorless / Transparent
Viscosity: High
Resistance: High
Physical properties before curing specific weight Conditions: 22°C: 1.07
flash point Method: ASTM D56-05: 83°C
Corrosion property: Not Corrosive
Gap-filling: 0.20 mm
Solvent ratio : 0%
Viscosity Conditions : 22°C: 1200 - 1700 cP
Curing properties Various curing times of the adhesive on various surfaces are given below.
Note that the results may vary depending on the width of the gap between the surfaces to be bonded, temperature and relative humidity.
Conditions: 22°C and 50% relative humidity.
Instructions for use;
Remove the cover, pierce the tip of the glue with the needle supplied in the box and apply a small amount of PUNTA Feather Adhesive to one of the surfaces.
It is recommended to apply one drop per 3 cm2. Curing time may vary depending on the amount of adhesive and the type of surface to be bonded.
Using more adhesive than necessary may delay adhesion or cause failure of adhesion.
- Press the two surfaces towards each other for about 10-30 seconds.
- Wait 24 hours for full cure.
Storage and shelf life :
Store the product in its original container at 22°C and do not expose it to direct sunlight.
Storage conditions below 5°C and above 25°C may adversely affect the properties of the product.
The product that comes out of its original container may become contaminated during use, which may adversely affect adhesion performance and shelf life.
Therefore, the contaminated product should not be returned to its original container. -
Cancellation Policy
To cancel your order, please email us your order number and information at 0 (216) 565 22 27 or mail us at info@naveksport.com.tr Your transaction will be carried out if no shipment is made.
How can I return it?
• You may return the product you received, in the form you received it within seven (7) days from the date of delivery, without unpacking / destroying the product or using it. You must return the product with a petition or return form containing the product invoice, order number. • Open and check the packages in front of the company representative you are considering shipping damage to. If there is any damage to the product, do not take delivery of the product by keeping a record to the cargo company. Please note that you have accepted that the cargo company fully fulfills its duty once the product has been delivered. • If the customer returns the product, the returned product will be returned in ten (10) days from the date of receipt to us. Your credit card product is returned by your bank within seven (7) business days. Your credit card may not reflect your account on the same day. In this situation you need to call the credit-card services of your bank. Repayments made on installment sales are reflected by your bank as a balance plus monthly payment of your credit card. • Unpackaged, used, destroyed products are not accepted.
• The shipping charge will be paid by the customer for products returned in accordance with the above conditions.
• For return notification, you can get information by phone at 0 (216) 565 22 27 or by email at info@naveksport.com.tr
